What we see on the bench
The Shark symptoms we diagnose most often, with the typical cause and the bench-side fix:
| Symptom | Cause | Fix | Range |
|---|---|---|---|
| Brush roll not spinning | Hair wrap at end caps or worn belt. | Clean and belt swap. | $25 to $55 |
| Lost suction | Saturated filter set or clogged dirt cup channel. | Filter swap and channel clean. | $25 to $50 plus filters |
| Burning smell | Same brush bar story as Dyson: jammed roller, motor still driving. | Brush clean. | $25 to $45 |
| Cordless not holding charge | Battery degradation around year 2 to 3. | Battery replacement. | $60 to $120 |
What we stock for Shark
Navigator and Rotator HEPA filter sets. Brush rolls for Navigator, Rotator, Vertex, APEX. Hose replacements. Cordless battery packs for the most common models.
Repair or replace
Shark vacuums are mass-market and don't have the 15-year service life of a Miele or Sebo. The rule we use: if the repair is under $80 and the unit is less than 3 years old, fix it. Past year 5, replacement is usually the better call.
Common questions
- Are Shark vacuums worth repairing?
- For minor jobs (under $80) on a unit under 3 years old, yes. For motor or PCB work on an older unit, replacement is usually better.
- Where do I get Shark filters?
- In stock at the shop. Bring your model number.